led lighting - when and where it makes sense

by:DGT Lighting     2020-07-25
First of all, what is the LED light?
LED is the first letter of the LEDs acronym.
The use of LED is very wide, for different work, in a variety of equipment.
Basically, they are small bulbs that are simply installed in the circuit.
However, unlike ordinary light bulbs, they do not burn out fine wires and do not get hot.
They are completely illuminated by the motion of electrons in half space.
Their lasting power is as long as the standard transistor.
The life of the LED exceeds the short life of the light bulb by thousands of hours.
Small LEDs have replaced the tube that lights up the LCD HD
Television that produces thinner televisions.
LED lights are not so cheap-
Especially for bulbs that emit the same energy as ordinary 60 or 75 W incandescent lamps.
However, during the life cycle of the product, the savings in maintenance costs and the reduction in total cost of ownership will offset the high cost of the original purchase of lights.
Compared to the old traditional bulbs, LED lights have several great environmental advantages.
Lamp is used between 50%-
90% less energy than standard bulbs, which means a significant reduction in carbon emissions because they do not contain mercury, so their longevity is 20 times longer and is made of fully recyclable materials
For example, the extruded aluminum radiator for LED downlights and LED spotlights is mainly used with post-
Materials for industrial recycling.
Because they are more friendly to the environment, because they are made of materials and have a longer duration, this means a reduction in household and commercial waste.
LED tubes used to replace traditional fluorescent tubes are made of \"Unbreakable\" plastic instead of glass, free of Mercury.
Fluorescent tubes flash with age, which can cause problems for migraine patients or patients with epilepsy.
In their lives, the LED tube does not flash at any time.
When and where are LED lights useful?
Due to the advantages of low voltage, life, reliability, fast conduction, etc.
The off switch, no UV emissions, no flicker and significantly reduced maintenance requirements LED are used in many applications.
They are mainly used: LED lights have many applications and are now used for night lighting, art lighting, home lighting
Cabinets under or next to the kitchen skirting, bedroom and living room, outdoor lighting, and even Christmas tree lighting.
They are usually used in gadgets such as mp3 players, DVD players, computers and televisions.
Versions with LED bulbs can be used for general fixtures, but these bulbs are more expensive.
The flash also takes advantage of LED technology as it is able to be easily guided in a steady stream.
They can be seen even in traffic lights and outdoor signs in some towns.
Many automakers are also using led as headlights.
Parking lots, airports, hotels, bars, clubs, business offices, manufacturing, hospitals, elderly car facilities, mining, boats, elevators, take advantage of the advantages of LEDs, export signs and many other areas are now being used.
We even found them in photographic equipment, they are available in various sizes, and some offer additional options for flash function, which can provide additional flash when needed.
How long does the LED light last?
The brightness of the LEDs is gradually reduced, not the classic extinction.
Number 100,000 hours (about 11 years)
As mentioned in many articles, because the LED is a diode, it will still use the power supply even if it stops emitting light.
Because you understand the basics of LED lights and the many advantages of choosing this way of lighting than choosing a standard way of lighting, this means that you can make the right choice for the right light for the intended purpose.
LED lighting is simple, energy efficient, can save your money, and is better for the environment.
The above is just a few good reasons to consider when buying LED lighting.
Custom message
Chat Online
Chat Online
Chat Online inputting...